Events

What to do if the wrong ink is added to fedar heat transfer printer

August 11, 2020

The ink supply system provides continuous ink supply for fedar heat transfer printer, which ensures the continuous ink supply and printing quality. However, what should I do if I accidentally add the wrong ink during the use of the ink supply system?

 

Adding the wrong ink to fedar heat transfer printer may cause agglomeration, and the wrong ink can cause color confusion. In some cases,fedar printer can be printed, but in severe cases, fedar printer cannot be used at all. In view of this situation, it is recommended that the user completely clean the ink cartridge and clean the chip. You can use an eraser to wipe the chip, and then try to install it. After confirming that the print can be recognized, the ink cartridge can be processed.You can use fedar heat transfer printer to repeatedly clean it deeply, and finally add ink correctly.

Fedar Heat Transfer Printer

In addition, during the use of the ink supply system, we also need to pay attention to the following points of use:

 

1. When adding ink to fedar heat transfer printer, please add ink according to the color identification. Do not add the wrong ink. Mixing different inks will cause the printing color to be incorrect. On the other hand, it may cause the nozzle to block and other malfunctions.

2. When adding ink, you can use a funnel to assist. Place the funnel on the ink cartridge adding hole, and then pour the ink into the funnel to add it to avoid spilling ink.

3. In order to ensure that the pressure from the ink tank to fedar heat transfer printer head is normal, and there will be no ink disconnection during printing, the ink in the ink tank should be kept at least 100ml, and the ink should not be overfilled.

4. When replacing different inks, the relevant ink cartridges should be cleaned to avoid related impurities, precipitation, etc. that affect the continuous ink supply.

Add Wrong Ink to Fedar Printing Machine