Several factors that cause instability of Fedar sublimation printer head

If Fedar sublimation printer head is unstable, it is easy to cause Fedar sublimation printer to have nozzle missing or damage print head. Therefore, in order to avoid these phenomena, we should be aware of several factors that cause Fedar sublimation printer head to be unstable.

1. If Fedar sublimation printer head is broken, then only replace a new print head.

2. If Fedar sublimation printer head is blocked, you can clean print head.

3.Be sure to use ink produced by original manufacturer, and ink volume in Fedar sublimation printer head should also be regulated. The standard should be pre-added 20-25ML ink volume. Too much or too little will cause print head to not inkjet ink.

4. Static electricity will also interfere with Fedar sublimation printer head, so be sure to connect ground wire to Fedar sublimation printer.

5. Ink circuit system failure will also cause Fedar sublimation printer head to be unstable, such as ink tube leaking.

6. Dirty or broken contact strips will cause Fedar sublimation printer head to not emit ink.

Usually, there are only so many factors that cause instability of Fedar sublimation printer head. Usually, these factors must be avoided as much as possible, so that Fedar sublimation printer can work better.

Zhengzhou New Century Digital Technology Co., Ltd.,- (Fedar Printer:www.fedar.com.cn)is a high-tech enterprise specializing in research, manufacture, sale and service of sublimation printer，digital textile printer ,inkjet heat transfer printing machine and related consumables.

By cooperating with world famous printhead manufacturers and software suppliers, we integrate exquisite and practical technology into our products. Up to now, fedar printer has independently developed a series of mature products.