Points when installing Fedar sublimation printer
When installing Fedar sublimation printer, you need to pay special attention to avoid wrong operation affecting use of sublimation textile printer. Fedar sublimation printer manufacturers have summarized some points that need to be noticed when installing sublimation printer for your reference.
1. First, place Fedar sublimation printer frame and parts according to relevant machine installation instructions, and then assemble it. When assembling, it should be noted that all screws of sublimation printer must be tightened to prevent printer from shaking during printing process, affect printing effect of Fedar sublimation printer.
2. Connect relevant ink cartridges, damper, ink tubes and print head. Especially installation operation of print head, must be installed according to installation instructions.
3. After ink cartridge is installed, check whether ink supply pipeline is connected properly, fill ink cartridge with ink, and be careful not to overfill it when adding ink to ink cartridge. Turn on ink pumping function of Fedar sublimation printer, introduce ink into print head, or manually perform ink pumping operation. After completion, check flashing and test related printing. If it is normal, installation is successful.
4.Connect Fedar sublimation printer to computer according to instructions, install relevant software and drivers, if it is a network connection, set up relevant IP address and connection test on computer according to instructions.
Zhengzhou New Century Digital Technology Co., Ltd.,- (Fedar Printer:www.fedar.com.cn)is a high-tech enterprise specializing in research, manufacture, sale and service of sublimation printer，digital textile printer ,inkjet heat transfer printing machine and related consumables.
By cooperating with world famous printhead manufacturers and software suppliers, we integrate exquisite and practical technology into our products. Up to now, fedar printer has independently developed a series of mature products.