Events

How to solve large advertising that cannot be printed?

March 31, 2020

The printer is necessary equipment in the advertising printing industry. The width of printer is generally 1.6m, 1.8m, 3.2m. With the development of the advertising industry, people have larger and wider requirements for print size. What should we do when our printer cannot meet the wide requirements?
With the continuous improvement of our technology, the quality of the printing has become higher. The required size is larger, but the printer cannot print it at one time. we all need to use the stitching method, but it will produce certain errors. How should we do to avoid such errors?

1.During cutting the picture, when the first picture comes out and the printed picture is free from any errors, you can proceed with the second picture immediately. However, we should pay attention to the fact that the picture should be rotated 180 degrees from the end when printing, so as to prevent errors.
2.Using this method, we can also use drawing software, first use jpg format, then import it into ps, and cut it. But it should be kept within 2cm when cutting. If there is no gap, we can choose a smaller area, and when cutting, we must avoid cutting  fonts.

If we encounter such similar problem, control the error to the minimum, we must use the same type of paper when splicing.If when printing, after one piece of paper comes out, the second piece must be followed, so as to avoid the problem of picture error.

Advertising Printing Industry