Events

Fedar inkjet t shirt printer maintenance under low temperature conditions

August 26, 2020

The impact of low temperature on fedar inkjet t shirt printer cannot be ignored. Failure to pay attention to inspection and maintenance will directly affect the normal operation of fedar inkjet t shirt printer. So, how should the photo machine respond?

 

1. Pay attention to the environment of fedar inkjet t shirt printer

 

The lowering of the operating environment temperature will not only slow down the drying speed of the printed pictures, but also easily cause printer head of fedar inkjet t shirt printer to block. Therefore, in order to ensure the normal and smooth output of fedar inkjet t shirt printer, we must first pay attention to the working environment of fedar inkjet t shirt printer.

 

The suitable working temperature range of fedar inkjet t shirt printer is 15℃-30℃, and the humidity value is between 35%-65%. At the same time, in the case of low temperature, do not place fedar inkjet t shirt printer in an outdoor environment. If the temperature and humidity in the operating room is low, air conditioning can be appropriately used for heating and humidification.

 

2. Cleaning and maintenance accessories of fedar inkjet t shirt printer

 

In the low temperature climate, in order to ensure the effective, stable and continuous output of fedar inkjet t shirt printer, relevant cleaning and maintenance work must be done.

 

① Printer head. First clean the moisturizing sponge with the cleaning liquid, and then soak the sponge with the cleaning liquid, move fedar inkjet t shirt printer head back to the rightmost capping station, and make printer head and the moisturizing sponge tightly integrated to ensure the cleaning and moisturizing of the nozzle.

 

② Guide rail. After turning on the power of fedar inkjet t shirt printer every day, let the trolley hit back and forth several times, the dirt in the guide rail slider will remain on the guide rail, and then use a cotton swab to moisten it with a small amount of alcohol to wipe it. In addition, in low-temperature environments, it is recommended to use lubricating oil to maintain the guide rail once every two weeks to ensure the smoothness of the guide rail.

 

③Encoder strip. The encoder strip is a transparent film behind the frame of fedar inkjet t shirt printer, which plays a role in positioning. If the grating is dirty, ghosting will occur. Use a cotton swab to dip clean water to wipe, clean both sides, but do not use brute force.

Fedar Inkjet T Shirt Printer Maintenance under Low Temperature