Fedar inkjet t shirt printer head burned?
When we are using fedar inkjet t shirt printer, if there is a problem with the print head, don't think about replacing the print head first. You should check it carefully and make a thorough judgment whether the print head is burned out. Do not change fedar inkjet t shirt printer head blindly.
In fact, when fedar inkjet t shirt printer is working, the print head cannot eject ink. It may not be that inkjet t shirt printer head is burned. There are many factors that may cause printer head to fail to eject ink. We only need to check it briefly to determine fedar inkjet t shirt printer head actual situation, there is no need to replace printer head at will, wasting money.
First of all, when encountering fedar inkjet t shirt printer head that does not inkjet ink, remove the print head first. Take care when removing the print head and do not scratch the surface of fedar inkjet t shirt printer head, otherwise the print head will be scratched even if it is not broken. After removing fedar inkjet t shirt printer head, you can use a paper towel or towel without lint, and lightly dip the surface of printhead to see if there is any ink leakage. If there is no ink leakage, it means that fedar inkjet t shirt printer head is internally blocked. Just clean nozzle again. . It may also be caused by the problem of encoder strip of fedar inkjet t shirt printer or the damage and deformation of the small frame. At this time, you only need to determine the cause, and normal repair or replacement of accessories is enough.
If none of the above methods can rule out the print head problem, we can first check the other parts of fedar inkjet t shirt printer, first to see if the ink in the ink cartridge is insufficient, if the ink tube is leaking or damaged; furthermore, check if damper is damaged. If there is no problem with fedar inkjet t shirt printer accessories, then the user can clean the print head several times, then adjust the printing accuracy mode to 6PASS or above, and then print test to see if it can print normally. If it can print normally, it means some nozzles are damaged, but it can be used normally when printing in high-precision mode. If it still cannot print normally, it means that all nozzles of a certain color are burned out and cannot be used anymore and need to be replaced.