Events

Fedar heat transfer printer connection failed

September 07, 2020

In the process of using fedar heat transfer printer, you will inevitably encounter various problems, such as the failure of fedar heat transfer printer connection. What should I do if this problem occurs? Fedar heat transfer printer manufacturers simply share the processing methods:

 

1. Software error
Solution: reinstall the driver software of fedar heat transfer printer.

 

2. Fedar heat transfer printer driver is not recognized
Solution: Open the device manager and check whether the USB is recognized normally.

 

3. The origin switch of fedar heat transfer printer is damaged

Solution: Push the trolley to the middle of the printing panel and turn it on. If the trolley moves to the left, the origin sensor may be broken; if the trolley moves to the right and hits the right baffle, you need to check whether the stop piece of the trolley can be inserted to origin sensor or the origin sensor is broken.

 

4. Damaged motor and motor drive board of fedar heat transfer printer
Solution: Push the trolley into the middle of the printing panel and turn it on. If the trolley does not move, use a card to block the origin sensor. If it can be connected, it may be a problem with the motor and the motor drive board.

 

5. Computer system failure
Solution: Replace the computer or reinstall the computer system.

 

6. Main board failure
Solution: Replace the main board.

The above situations can generally be solved. If you really don't know how to deal with it, you can consult a technician.

Fedar Heat Transfer Printer Connection Failed