Events

Fedar heat transfer printer cannot draw ink normally

September 09, 2020

Fedar heat transfer printer uses micro-piezo inkjet technology, which should ensure the airtightness between the ink cartridge, the ink supply tube and the damper, so that the entire ink supply system can be closely connected. If the sealing performance is not good, and there is an air leakage problem, it will easily cause the printer nozzle missing, fail to supply ink, fail to draw ink normally, and return ink in damper.

 

It is a common machine failure that fedar heat transfer printer cannot draw ink. For this, we have summarized several common reasons:

 

1. Fedar heat transfer printer capping station position is not correct, you can try to re-adjust capping station position;

 

2. Fedar heat transfer printer cap is deformed or aging, it is recommended to replace it (pay attention to the maintenance of cap and more cleaning);

 

3. Fedar heat transfer printer pump does not turn, check the wiring to see if the connection is correct;

 

4. Fedar heat transfer printer head data line is not plugged in properly;

 

5. Fedar heat transfer printer head is damaged, it is recommended to replace with a new head;

 

6. Fedar heat transfer printer head frame is not adjusted properly, which may cause the capping station position to be incorrect.

 

I hope this summary can be helpful to you.

Fedar Heat Transfer Printer Cannot Draw Ink