Events

Fedar heat transfer paper printer head removal and installation

August 13, 2020

Fedar heat transfer paper printer head is a precision part, and improper operation can easily cause damage or even burn the print head. So how should Fedar heat transfer paper printer head be removed and installed correctly?

 

1.Fedar heat transfer paper printer head should be powered off when it is installed. If it is easy to break print head when it is powered on, gently push the trolley to move left and right after installation to check whether it is smooth. If the control is strong, Fedar heat transfer paper printer head is already.It can be powered on only when it is installed in place.

 

2. Do not install ink when Fedar heat transfer paper printer is powered on, and then check if there is a bad contact, otherwise the printer head will burn out due to short circuit.

 

3. There must be protective measures on the surface of Fedar heat transfer paper printer head, and do not collide, so as to avoid damage and deformation and affect the normal operation of Fedar heat transfer paper printer.

 

4. At this time, you can add ink, the amount of ink, the ink suction pump, and the cleaning sheet one by one.

 

Most of Fedar heat transfer paper printer heads installed for the first time have air inside, so you must print a picture sample to exhaust the air before performing normal printing.

 

Fedar heat transfer paper printer head is the key part of the printing machine, and it must be operated according to the correct operation steps. Fedar heat transfer paper printer head adopts Epson print head technology, leading technology, guaranteed quality and longer service life.

Fedar Heat Transfer Paper Printer Head Removal and Installation